What Should Happen in the First 24 Hours After a Tenant Reports a Leak
Property manager checklist for the first 24 hours after a tenant reports a leak: document, stop the source, same-day drying, and when to open a claim.
In the first 24 hours after a tenant reports a leak, document it, stop the source, get drying equipment and a plumber out ASAP, then get a couple of quotes — waiting overnight on wet drywall or carpet pad is how a one-day leak becomes a week of tear-out. This is an operations checklist for property managers and HOA boards, not a landlord-versus-tenant argument.
Tenant reported a leak today? Call 24/7 · (801) 948-2501.
Short answer: After a tenant reports a leak, photograph and video the loss, stop the water, and get someone out immediately to stabilize with drying equipment (at least a dehumidifier) and a plumber ASAP — then get a couple of quotes. Keystone Restoration's property-manager workflow keeps the owner or manager in control of the job and the resident updates while we extract, dry, and document.
What should happen in hour one?
A property manager asked us for a same-day leak-response checklist. Condo boards asked a related question when a ceiling stain appeared under the unit above. Use this order:
- Take the report seriously and time-stamp it. Note when the tenant called, what they said was wet, and whether water is still active.
- Photo and video before anyone moves much. Wide shots of each room, then close-ups of the wet materials. Ask the tenant to send their own phone video if your tech isn't on site yet.
- Stop the source if it's safe: toilet supply, fixture shutoff, unit angle stop, or the building main if needed.
- Cut power to wet outlets and fixtures only if you can do it safely at the breaker.
- Dispatch mitigation and a plumber the same day — both ASAP. Get someone on site immediately to stabilize (at least a dehumidifier and extraction if there's standing water) when carpet, pad, drywall, or ceilings are wet, and get a plumber out as soon as possible to stop or confirm the source. Then get a couple of quotes so the owner or manager stays in control of the scope. EPA guidance is to dry water-damaged areas within 24 to 48 hours to prevent mold growth.
Who stops the plumbing versus who dries the building is covered in plumber or restoration company first.
What should the rest of day one look like?
- Extraction and protection. Standing water out, contents moved or blocked, clean areas protected. Stabilize early — dehumidifier and air movers on wet materials beat waiting for a full quote before any drying starts.
- Plumber and mitigation both ASAP. Source control and drying are parallel tracks. Don't wait on one before calling the other.
- Moisture mapping. Readings on walls, floors, and ceilings so the scope matches where the water went, not just what looks wet. Here's how pros confirm dryness later.
- Written scope — and a couple of quotes. Rooms affected, category of water if known, equipment on site, and what's excluded. Get more than one quote when you can so the owner or manager stays in control of the decision.
- Resident communication from the manager. You stay the voice to the tenant. On multifamily jobs, Keystone works for the owner or property manager and does not manage tenant conversations for you — see our property manager and multifamily page.
- Claim decision. If the loss may exceed the deductible or involves another unit, open the claim and share the documentation pack. For cost allocation between units, our earlier post on condo upstairs leaks and who pays covers that question; this post stays on the first day's operations.
Why same-day mitigation beats waiting overnight
Wet drywall, pad, and sill plates don't pause because the office closed. Overnight on a warm building is often enough for odor and for moisture to wick past the visible stain. Same-day extraction and setup keep the loss smaller and the file cleaner when an adjuster asks what you did when you learned about it.
If the leak is from the unit above, get into both units the same day when you can. A ceiling that looks "just stained" can hide wet insulation. Related reading: renter upstairs leak before walls are closed and ceiling leak under a bathroom.
What if the tenant caused the overflow?
Still document and dry first. Cause and chargebacks can be sorted after the water is under control. Arguing fault while carpet pad stays wet helps no one. Keep the tone operational: stop the loss, protect the building, keep a clean file. Move-out and turnover water checks are a separate habit — see tenant move-out water damage checkups.
What belongs in the documentation pack?
- Tenant report time and description
- Photos and video before tear-out
- Cause, if known (supply line, overflow, tub, roof, unit above)
- Moisture readings and equipment logs
- Temporary repairs and plumber invoices
- Who authorized the work (owner, manager, HOA)
That pack is what makes insurance, board, and resident conversations shorter. It also supports commercial and multifamily workflows described on our commercial and property manager water damage compare page.
Who pays for day-one mitigation while the claim is sorting out?
Get authorization from the owner or manager before equipment rolls, and put the billing party in writing. If a claim is opened, keep receipts and the moisture log with the claim number. Coverage still depends on the policy; nothing about same-day drying promises the carrier will pay every line. The goal on day one is protecting the building and creating a file someone can defend later.
What's the first-24-hours checklist for PMs?
- [ ] Time-stamped tenant report
- [ ] Photos and video before demo
- [ ] Source stopped; wet circuits handled safely
- [ ] Same-day mitigation (dehumidifier/stabilize) and plumber dispatched ASAP; couple of quotes in hand for the owner/manager
- [ ] Moisture map and written scope to owner/manager
- [ ] Resident updates sent by the manager
- [ ] Claim opened when appropriate, with the documentation pack
- [ ] Follow-up reading scheduled before equipment pulls out
When should I call a pro?
Call when a tenant reports active water, a stained ceiling from the unit above, or wet carpet and pad in a ground-floor or basement unit. Keystone Restoration is an IICRC Certified Firm (#70266523). We work across Salt Lake, Utah, Davis, Wasatch, and Summit Counties for owners and managers, and we keep per-unit documentation separate on multi-unit losses. Our owner, Seth Saxton, holds IICRC WRT, AMRT, ASD, FSRT, and OCT certifications. Rebuild is handled by Keystone BuildWorks. Learn more about water damage restoration.
Need same-day documentation and drying on a rental? Call 24/7 · (801) 948-2501.
Questions about your specific situation? Talk to us — advice is free, 24/7.
